Intruder MKII twin

[xkos1975]

Hi to all members here,
i want to build a twin H&M Intruder MKii (95cm).
My setup will be two tenshocks 2250/5 2600kv (or leos 3674 2650), 2x T180, running on 4 and 5s per motor. Can anyone have any experience with that hull with twin motors? or is any thread with the same project?
My goal is speeds between 110-130kmh. Any suggestions?
Thanks

[andi 66]

Hallo
http://vimeo.com/35103782

Intruder MKII 2 x TS 2250/4 - 146,6 km/h

[xkos1975]

Hallo
Look at this video

Intruder MKII 2 x TS 2250/4 - 146,6 km/h

Do you have a link?

[andi 66]

http://vimeo.com/35103782

http://www.hydroworld.de/vb/showthre...gebung/page245

Look at post 2449

[xkos1975]

http://vimeo.com/35103782

http://www.hydroworld.de/vb/showthre...gebung/page245

Look at post 2449

Thank you Andreas.
This is the faster Intruder i have ever seen. Very good work.
One last question is any building progress of Steve27 in this forum?
Thanks for your help again.

kostas

[andi 66]

One last question is any building progress of Steve27 in this forum?

Yes its from Steve27

best regards

[Steve27]

Some little mistakes .

On this Video , the Intruder works on only 4S per Engine , with Tenshock 45mm 3blade props. Vmax with these Setup only 126 km/h .

With 5S per Engine and Octura X447 , was 146 km/h achieved .

This Engine from Tenshock has 3250 K/V on 5S , are 60000 rpm = heavy for the drives

[xkos1975]

Steve27,
i really like your boat...thats why i decide to build a Intruder MkII. Please tell me some things about how intruder behaves at high speed passes. Is it stable? How is your temps of motors-controllers? I believe the 2250/5 (2600kv) might be more suitable for a 95cm hull reducing amps draw and temps. What do you think? Ruder and powertrims (drives) are from Hydro Marine?