Seite 4 von 8 ErsteErste 1 2 3 4 5 6 7 8 LetzteLetzte
Ergebnis 61 bis 80 von 144
  1. #61
    Abwesend...
    Registriert seit
    15.03.2008
    Ort
    Siegen
    Beiträge
    1.977

    Standard

    You use your super caps, I feed the ducks...

  2. #62
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    Zitat Zitat von Sika Beitrag anzeigen
    You use your super caps, I feed the ducks...
    You should enjoy that........
    Quack!
    Geändert von cohesive (30.March.2014 um 05:00 Uhr)

  3. #63
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard Duck sauce

    1396568448325.jpg1396566210168.jpg
    Tried and true traditional 7500uf AL electrolytics cap banks I built .I piggy back with small ceramics across the leads.


    but heres photos of a supercap amp that passes 70 amperes
    supercap_amp2.jpg
    supercap_cpu.jpg



    ..
    Geändert von cohesive (4.April.2014 um 20:29 Uhr)

  4. #64
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    Good day all. Happy birthday Christian, . Here look at the components for the BLDC. You dream 6 phase controller in theory the bridge just adds 3 more high low channels with possibly additional current watchdogs using a shunt and op amps. Ir also just sent me a letter of a new 60 volt "strong fet". I havent had time to look at it yet.



    Happy boating
    Hubert

    112511133027.jpg
    Geändert von cohesive (18.April.2014 um 18:20 Uhr)

  5. #65
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    Christian, one thing about materials that wasnt discussed on the other forum in the US was the magnetic properties and how some metals lose, change, or maintain their magnetic properties in heat treatment processes, I thought of this when Micheal made a comment about the stainless steel shells magnetic properties not being ideal and the 440C stainless, in the prop thread, that maintains its magnetism though all heat treatments. I do not know if this would be a good thing in that specific case, but I do wonder about the can of an outrunner and the ideal materials from which they should be made. You had one that lost its roundness due to high rpm, I remember the wire fix but wonder what materials would give you the ideal mechanical properties for high rpm but also exhibit excellent electrical properties? I would also like to know more about the SNK bearing you run.

    Thank you for your time gentlemen
    Hubert
    Geändert von cohesive (6.May.2014 um 09:02 Uhr)

  6. #66
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    Greetings gentlemen. Looking at the TI insta spin video and reading a microchip app note, It seems that it is just a fancy name for Field oriented commutation.In a non - hall format this seemed to me to be the best style for what we do.Is there something better? In the end would it be in anyones opinion that if a high quality controller was to be built it have hall sensor capability?

    I know that hacker had released airplane packaged "sinus drive" with motor and controller. I assume using a sinusoidal commutation on a pm motor? Could it be right? I dont know if the airplanes are different as far as demands, but it certainly seems a boats exerts varying load on an electric motor.
    Geändert von cohesive (21.May.2014 um 09:04 Uhr)

  7. #67
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard


    My Turnigy T600 rework:

    Originally 1400kv @ 8 turns delta of unknown small gauge multistrand

    4030 stator with 5+6 STSD turns of 1.3mm Fosgate magnet wire.
    Kapton and Nomex insulated.
    3-100 k rpm capable ceramic hybrid bearings

    for practice....

    Hope to run ABCABC/ABCABC for parallel or six phase operation.

    Remember......


    Hubert

    Hit 3,515
    Geändert von cohesive (22.October.2014 um 16:36 Uhr)

  8. #68
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard 6 phase topology


  9. #69
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    Hi Christian, Micheal, Guys...

    Just wanted to share where I am at with winding motors now.

    Kontronics Pyro 800 6 + 6 YY 1.53162mm (15Ga.) mono wire Kv 485

    Hubert




    Generated BEMF @ 2,250 rpm
    Geändert von cohesive (20.November.2015 um 00:27 Uhr)

  10. #70
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard


    Pyro 800 7 + 7 YY 15Ga. 420 Kv

    Hubert
    Geändert von cohesive (21.November.2015 um 16:28 Uhr)

  11. #71
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard


    I ordered some carbon fiber props to load motors and log the data.
    Angehängte Grafiken Angehängte Grafiken

  12. #72
    Forenlegende Avatar von Ch.Lucas
    Registriert seit
    31.03.2008
    Ort
    82166 Gräfelfing
    Beiträge
    1.297

    Standard

    Hi Hugh,

    be careful ,this motor can power yourself standing on a surfbord . Good job .
    Happy Amps Christian
    GO FAST TURN RIGHT AND GET OUT OF MY WAY

  13. #73
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    Thanks Chris,
    Safety will be in place.

    Hubert
    Geändert von cohesive (22.November.2015 um 01:06 Uhr)

  14. #74
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    20151121_225904.jpg
    apc1708e ( 432mm X 203mm)
    Geändert von cohesive (22.November.2015 um 12:24 Uhr)

  15. #75
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    Products came.
    Angehängte Grafiken Angehängte Grafiken
    Geändert von cohesive (25.November.2015 um 06:35 Uhr)

  16. #76
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    Hi


    HK III 4035 two strands of 16 Ga.(1.35mm measured) 3 + 3 parallel wye ~ 990 Kv
    Angehängte Grafiken Angehängte Grafiken
    Geändert von cohesive (30.November.2015 um 12:06 Uhr)

  17. #77
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    Termination for parallel wye. The two strand groups weren't too difficult to manage.

    post-4995-0-00783500-1448621311_thumb.jpg

    Hubert
    Geändert von cohesive (30.November.2015 um 12:07 Uhr)

  18. #78

  19. #79
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard



    Free from the ESC I used the "drill method" and calculated a kv of a 1040 Using the oscilloscope and a electric hand drill rated at 2250rpm.

    On the Castle Ice I logged an Io of 4.4 amp @ 22.5 volts the Kv was logged at approximately 1190. I take the Rm measurement using 4 wire method. A 2250mah 3s lipo a 10 watt 20 ohm resistor and two DMM's. I will report back shortly.

    Thanks
    Hubert













    Geändert von cohesive (28.November.2015 um 21:36 Uhr)

  20. #80
    Gesperrt
    Registriert seit
    29.11.2012
    Ort
    usa
    Beiträge
    221

    Standard

    post-4995-0-44708000-1448955240_thumb.jpg
    I started a 7 turn LRK YY on a 40 x 30mm Turnigy T600 stator with 13 ga. (1.91516 mm) If it returns a good numbers I think the MKIII 4025 I have here will be wound similarly. Maybe it will suffer badly from skin effect and I wont.....




    Happy Boating
    Hubert

Seite 4 von 8 ErsteErste 1 2 3 4 5 6 7 8 LetzteLetzte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •